Skip to main content

Kia GT4 Stinger concept

Kia has shown its first rear-wheel drive sports car at the Detroit motor show. The GT4 Stinger was shown to the press as the brand’s potential rival for the Toyota GT-86 and Subaru BRZ.

What is this car all about?

The GT4 Stinger is a 2+2, front-engined coupe powered by a 311bhp 2.0-litre turbocharged four-cylinder petrol engine taken from Kia’s Optima racecars. That makes it substantially more powerful than the Toyota, with its 197bhp, but like the GT-86, the Kia is focused on being a proper driver’s car.

Hence, the 4.26-metre long coupe has been designed to weigh a mere 1315kg in production form, runs double wishbone suspension front and rear and doesn’t even have a radio. ‘The soundtrack comes from the engine and out of the exhaust,’ says the concept’s head designer, Tom Kearns.

What’s the idea of the design, and what would this car cost?

‘Our whole approach has been to do something very simple and pure, but new looking,’ Kearns says. ‘It’s a very simple shape, so that was our thinking’. While strictly a concept, Kearns says that if it makes production, the GT4 will be cheaper than the GT-86, which starts at £25k. The GT4 would run a modified version of the Genesis platform, he suggests. ‘We’ve got to make it lighter and smaller to capture the essence of this concept, but I think it’s do-able,’ Kearns says.

So is this a production-viable concept?

Most of the car is production viable, apart from the stacked LED headlights, which are too low for US regulations, while the viability of the see-through A-pillars hasn’t been evaluated either. Yet it’s not a pipedream or crazy concept. ‘We always imagine it [a concept] on the street,’ says Kia president, Peter Schreyer, ‘and that’s the same with this car’.

The Detroit reveal was the first time Kia’s board has seen the car, according to Schreyer. ‘We have not done any feasibility on it, but my gut feeling is there’s nothing about it that’s not possible.’ It’s expected that the GT4 Stinger will be in showrooms in 2016 if it’s given the green light for production.

Popular posts from this blog

Porsche 913

Forgetting the Panamera, Cayenne and Macan, Porsche offer a pretty well-rounded sports car range. Starting with the Boxster and Cayman, and moving up the multitude of variations of the Porsche 911, all the way up to the 918 Spyder supercar. But there is a HUGE price gap between the top of the range 911 Turbo ($250,000 will all the options ticked), to the 918 Spyder ($800,000). Somewhere in that range Porsche could surely offer something to compete with the likes of Ferrari and Lamborghini. Something like the 913 possibly? Conceived by the fertile mind of Rene Garcia, a professional 3D modeller who has created conceptual vehicles and highly detailed models for some of the biggest movies of the past decade, including the Matrix Trilogy, Transformers, the latest Star Trekthrillers and The Avengers, the Porsche 913 is an exquisitely rendered design in every detail. It has a bit of the 918 Spyder about it, but there’s also a lot of originality to the design. It looks like a Porsche, but a

Lamborghini Canto – What the Murcielago could have been?

Back in the late 1990s, when Lamborghini were starting to realise they needed a replacement for the ageing Diablo, they started reviewing design proposals from various automotive design firms. Zagato’s offering was the Zagato L147 SuperDiablo, or as it was to be later known, the Lamborghini Canto. The Lamborghini Canto first appeared in 1998, it arrived only two years after another Zagato designed Lamborghini concept had been unveiled, the Diablo-based Raptor. The cars shared a number of similar features, including the wraparound windows, triangular lateral air intakes, and trademark double-bubble roof. However of the two, the earlier Raptor was probably the better looking. Clearly Ferdinand Piech – head of the Volkswagen Group – thought so too. After VW bought Lamborghini in 1999, one of his first decisions was to review the Canto’s development and redesign the concept. The car was re-engineered and the rear extensively restyled to include smaller air intakes. The engine was also up

BMW GINA

The BMW GINA changes the design rulebook concept which features clever use of materials and technology. The GINA acronym stands for 'Geometry In "N" Adaptions'. The 'N' stands for infinite. Quite logical really... While at first glance the BMW GINA appears to be nothing more than a modified and stretched BMW Z4. As soon as the doors are opened it reveals its true nature. Covering the lightweight spaceframe of the BMW GINA are not conventional metal bodypanels, but instead an elastic, rubber-like material is stretched across the structural members and wire frame to form an attractive design which follows BMW's flame surfacing styling philosophy. This elastic material has given BMW's designers more options when designing various moving parts of the GINA concept. The doors for example have no shut line along their front edge as the material just moves with the door. At the rear the electro-hydraulic adjustable spoiler rises and lowers under the skin of